Sunday, April 20, 2014

Pump It Up-3 Piece Set


 
 
 
 
This tut was written for those with a basic knowledge of psp.
I am using the awesome artwork of  Arthur Crowe.
You need a license to use this art work. Please do not use without a license.

 You can find this art at his Store  HERE
 
Supplies Needed
I used PSPX...but any of them should work.
Pump Up The Volume by Melissaz Creationz  HERE
This kit is part of a Blog Train

Template 003 by Polka Dot Scraps HERE
Is part of Pump of the Volume Blog Train
It is a 3 piece template set.
 
 Rocked by Rachel Mask Set 7-#2 Mask HERE
Filters
penta.com filter-jeans
xero filter-Radiance
Font Sick Capital Vice

Drop Shadow usually V2 H2 50 black

Let's get started
*Remember to add your drop shadow as you go along*
 
Open the tag template, hold the shift key and d to duplicate and close the original.
Delete the credits.

Go to Image, canvas size and make it 800 x 800 or one you prefer. I like a big area to work on, can resize later.

Select the large rectangle, paste paper 5, invert and delete.

Paste paper 7 on the big right circle and big left circle, invert and delete.
On the right large circle frame and left large circle frame, I add noise at 100%.

Merge the top small circle down with the bottom small circle, resize paper 2 to 75% and paste, invert and delete.

Select the top left square, add a new raster layer and fill with
#b265ff or color of choice.
Apply penta.com-Jeans with these settings
Amount20 - Width4
and then sharpen.

Leave the bottom left square the color it is or if you like another color.

Select the oval layer, paste paper 5, invert and delete.

Bottom right square, select, add a new raster layer and fill with #b265ff or color of choice.
Apply penta.com-jeans to this one also and sharpen.

Select the rectangle, paste paper 5, invert delete.
Go to Adjust, Blur, Gaussian blur at 10, duplicate and merge down.
Select the rectangle again, paste E12, adjust how you like it, invert and delete.

Select the top right square, paste paper 3, invert, delete, but do not deselect yet.
Mirror and paste your tube, delete, select none.
Change the blend mode to Luminance (L) and apply xero filter Radiance.
Add noise at 100% to the Top right square frame.

Add the penta.com filter-jeans to the arrow and sharpen.

Paste paper 2, apply your mask, move to the bottom, resize larger to your liking.

Resize and paste your tube, I resized my tube to 75% and place on the left side.

Select the wordart Pump Volume, add a new raster layer, make a gradient of choice and fill.
I used #b265ff for the forground color and #4d0ec4 for the background color and set the gradient at Angle 45, Repeat 10.
Apply EyeCandy 4000 Glass with these settings
Bevel width 10.80
75, 30, 35, 50, 0, 50 and change the color to what you used on the wordart.
Then on the wordart up the, I changed to white and added a medium gradient glow to it.

Resize E07 to 35%, place below your tube layer on the left.
Resize E09 to 25% and place on the right side below the wordart.

Mirror and paste E14 below your tube layer.
Resize E13 to 25%, duplicate a couple of times and place where you like them.

Resize E20 to 25%, place at the bottom by the wordart.
Resize E11 to 50% and place on the right below the hand element.

Before merging your tag, close off all layers except the wordart layers, both and the hand and radio, merge these together, copy and paste as a new layer to use later on your avator.

Add any other elements that you would like, once happy, open all the layers and close off any background and merge visible.
Resize and then add your name and Copyrights.

Now on to the Signature tag and Avator.

Open the signature template, hold the shift key and d to duplicate and close the original.

Delete the credits.

Select the background and paste paper 5, invert and delete.
Select the oval layer, resize paper 2 to 70%, paste, invert, delete.
Bottom middle square, apply penta.com-jeans at 20-4 and sharpen twice.
Top middle square, new raster layer, fill with with #b265ff and apply penta.com-jeans with same settings and sharpen.

Large circle paste paper 7, invert, delete.
Rectangle, paste paper 5, invert and delete, then apply Gaussian blur at 10, duplicate and merge down.
Select the rectangle again, paste E12, invert and delete.

Bottom right square, add a new raster layer, fill with #b265ff and apply the penta.com filter-jeans and sharpen twice.

Top right square resize paper 3 to 70%, paste and move over to cover the square, invert, delete, do not deselect yet.
Paste your tube, delete and select none.
Change blend mode to Luminance (L) and apply xero filter-Radiance.
Paste your tube and move to the left side.
Add the penta.com-jeans to the arrow.
Do the same with the wordart as you did on your tag above.
On all the frames add noise at 100%.

Paste and mirror E14 and move below your tube layer.

Resize E9 to 20% and place on the right, below the wordart layer.
Resize E13 to 15%, duplicate a couple of time and place where you like.
Resize E20 to 15%, place toward the top and sharpen once, duplicate and move toward the bottom below the tube layer.
Resize E11 to 25% and place on the right below the hand element.
Merge visible, add a new layer, select all, fill with a color of choice, contract by 2, delete, select none. Add noise if you would like.
Add your name and Copyrights.

Avator
Open the Avator template, hold the shift key and d to duplicate and close the original.

Delete the credits.

Delete the credits and the frame, unless you want to use the frame, then do not delete.
Raster one, paste paper 5, adjust how you like, invert and delete. Apply Gaussian blur at 3.
Circle, paste paper 7, invert, delete.

Bottom square, new raster layer, fill with #b265ff, apply the penta.com filter-jeans, and sharpen.
Top square, resize paper 3 to 50%, paste, invert delete, resize your tube to 50%, paste, delete and select none.
Change the blend mode to Luminance (L) and apply xero filter, Radiance.
Resize E14 to 50%, place below the tube layer in the square.
Now the wordart, and hand layer you saved from your tag, resize to 25% and paste on your avator.
Resize E13 to 15% and one to 10% and place how you like them
Resize E20 to 15%, place at the top below the top square.
Resize E12 to 15%, place just above the bottom circle layer.
Merge visible, select all, new raster layer, fill with a color of choice, add noise if you like.
Now add your name or letter and Copyrights and you are all done.
Hope you enjoyed doing this tut.
 
 

No comments:

Post a Comment